Products

STO 71915393-TU 040-2007

Product description

As outer strands of the rope go through crimping wheels, the strand becomes thicker – metal cross sectional area increases, strand form becomes smoother, and round, therefore the following advantages are achieved:

• increased wear resistance of wires
• decreased blocks groove wearing
• high tensile strength
• higher lateral compression strength

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

6хЗ6WS + FC

STO 71915393-TU 043-2007

Product description

The ropes are applied for hoisting at Р&Н 2800 type excavators

As outer strands of the rope go through crimping wheels, the strand becomes thicker – metal cross sectional area increases, strand form becomes smoother, and round, therefore the following advantages are achieved:

• increased wear resistance of wires
• decreased blocks groove wearing
• high tensile strength
• higher lateral compression strength

Organic fillers (OF) inside the rope serve as additional lubrication source which enables to protect the core from corrosion and reduce friction between rope core and outer strands.

Polymer material between the independent wire rope core and the outer strands protects the core from corrosion and decreases wire wear caused by strand friction on the core

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

8х37(1+6; 6+12+12) + 8 OF + 8х7 + 6х7 + 1х7

• Type 1 - with compacted outer strands
• Type 2 - with compacted outer strands and 6 organic fillers between the external and internal layers of the rope
• Type 3 - with compacted outer strands and polymeric filling between the independent wire rope core and outer strands

STO 71915393-TU 048-2007

Product description

Applied for manufacturing of deep burial anchors – mining rock fixing

Construction

6х7(1+6) +1х7(1+6)

STO 71915393-TU 049-2007

Product description

These wire ropes have a combined three-wire core and three organic fillers and offer a set of technological advantages compared to ropes manufactured according to GOST 16853-88: increased wear resistance and reduced impact load on the rope.

Basic advantages of ropes with compacted outer strands TU049 (type 2) are:

• high tensile strength;
• increased abrasive resistance of strand wires and rope strands;
• reduced wear of blocks and drums due to the increased area of contact with the rope bearing surface.

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

• Type 1 6х26WS + 3х19W+3 organic fillers (OF) without compacted strands;
• Type 2 6х26WS + 3х19W + 3 OF with compacted outer strands.

STO 71915393-TU 057-2008

Product description

As outer strands of the rope go through crimping wheels, the strand becomes thicker – metal cross sectional area increases, strand form becomes smoother, and round, therefore the following advantages are achieved:

• increased wear resistance of wires
• decreased blocks groove wearing
• high tensile strength
• higher lateral compression strength

Organic fillers inside the rope serve as additional lubrication source which enables to protect the core from corrosion and reduce friction between rope core and outer strands.

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

• Type 1 - 6хЗ6WS + 6х19S + FC with compacted outer strands
• Type 2 - 6хЗ6WS + 6х19S + 1x19S

Subtype 1 - with compacted outer strands;

Subtype 2 - with compacted outer strands and 6 organic fillers between the external and internal layers of the rope;

Subtype 3 - with compacted outer strands and plastic coated wire rope core.

STO 71915393-TU 059-2008

Product description

LK-Z type ropes are applied almost in a wide range of industries; however they should not be exposed to hostile environment conditions. The ropes have thin filling wires which are non-corrosion-resistant and thus should not bear hostile environment influence.

In comparison with the standard ropes GOST 7667-80, these ropes are characterized by better flexibility and higher tensile strength.

Construction

6х29F + 6х7 + 1х7

STO 71915393-TU 062–2008

Product description

Intended to be hung up on power transmission lines as protection from direct lightening strikes

Construction

1х36WS

Manufactured from galvanized wire with a heavy zinc coating

STO 71915393-TU 068-2008

Product description

These wire ropes can be manufactured of 2 types:

• type 1 - without compacted outer strands, with fibre (FC) or independent wire rope core (IWRC)
• type 2 - with compacted outer strands, with fibre (FC) independent wire rope core (IWRC)

and offer a set of technological advantages compared to GOST 16853-88:

• increased wear resistance
• higher flexibility
• reduced impact load on the rope.

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

6х26WS + FC

6х26WS + 7х7

STO 71915393-TU 090-2010

Product description

As outer strands of the rope go through crimping wheels, the strand becomes thicker – metal cross sectional area increases, strand form becomes smoother, and round, therefore the following advantages are achieved:

• increased wear resistance of wires
• decreased blocks groove wearing
• high tensile strength
• higher lateral compression strength

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

6х36WS + 7х7

STO 71915393-TU 091-2010

Product description

As outer strands of the rope go through crimping wheels, the strand becomes thicker – metal cross sectional area increases, strand form becomes smoother, and round, therefore the following advantages are achieved:

• increased wear resistance of wires
• decreased blocks groove wearing
• high tensile strength
• higher lateral compression strength

Organic fillers inside the rope serve as additional lubrication source which enables to protect the core from corrosion and reduce friction between rope core and outer strands.

Polymer material between the independent wire rope core and the outer strands protects the core from corrosion and decreases wire wear caused by strand friction on the core

These advantages extend the operational life of the rope and significantly reduce operating costs.

Construction

6хЗ6WS + 6х7 + 1х7

• Type 1 - with compacted outer strands
• Type 2 - with compacted outer strands and 6 organic fillers between the external and internal layers of the rope
• Type 3 - with compacted outer strands and polymeric filling between the independent wire rope coreand outer strands