Products

GOST 2688-80

Product description

Warrington type ropes are suitable in hostile environment conditions, ideal when used outdoors and exposed to intensive alternative bending. High structural strength of these ropes (wires of different diameters in the outer layer of a strand) provides effective use in strenuous conditions.

Construction

6х19 (1+6+6/6)+ FC

GOST 3077-80

Product description

Seal type ropes demonstrate stable operation in high abrasive wear conditions due to the increased diameter of wires in the upper layer. Increased blocks and drums diameter is required for their normal running.

Construction

6х19 (1+9+9)+FC

GOST 3088-80

Product description

Due to the increased number of strands (as compared to the 6 strand ropes) these ropes are more flexible, and at the same time, demonstrate high tensile strength and reduced friction between the outer wires of strands and the surface of block grooves.

Opposite lay direction of external and internal strand layers prevents the rope from rotating around its axis.

These advantages allow to extend the operation life of the rope and significantly reduce operating costs.

Construction

18х19 (1+6+6/6) + FC

GOST 7668-80

Product description

Warrington-Seal type ropes are characterized by a larger number of wires in the strand and resulting in high flexibility. Wires of a larger diameter in the outer layer of the rope provides its successful application under conditions of an abrasive and corrosive environment.

Construction

6х36 (1+7+7/7+14)+FC

GOST 7669-80

Product description

Warrington-Seal type ropes are characterized by a larger number of wires in the strand and resulting in high flexibility. Wires of a larger diameter in the outer layer of the rope provide its successful application under conditions of an abrasive and corrosive environment.

Construction

6х36 (1+7+7/7+14)+7х7(1+6)

DIN 3052 / DIN EN 12385-4-2003

Product description

Spiral ropes are characterized by the high factor of filling in the rope cross section with metal, which specifies minimal elastic and permanent elongations when using, that is why it is reasonable to apply such ropes as all kinds of strains.

Construction

1х7 (1+6)

DIN 3053 / DIN EN 12385-4-2003

Product description

Spiral ropes are characterized by the high factor of filling in the rope cross section with metal, which specifies minimal elastic and permanent elongations when using, that is why it is reasonable to apply such ropes as all kinds of strains.

Construction

1х19 (1+6+12)

DIN 3055 / DIN EN 12385-4-2003

Construction

6х7 (1+6)

Fibre (FC) or metal core (MC) ropes can be manufactured.

DIN 3057 / DIN EN 12385-4-2003

Product description

Filler type ropes are applied almost in all the industries, nevertheless they should not be applied in the hostile environment conditions.

They have thin filling wires which are non-corrosion-resistant and thus should not bear hostile environment influence.

Construction

6х25 (1+6;6+12) (F)

Fibre (FC) or metal core (MC) ropes can be manufactured

DIN 3058 / DIN EN 12385-4-2003

Product description

Seal type ropes demonstrate stable operation in high abrasive wear conditions due to the increased diameter of wires in the upper layer. Increased blocks and drums diameter is required for their normal running.

Construction

6х19 (1+9+9) (S)

Fibre (FC) or metal core (MC) ropes can be manufactured