Download our catalogs HERE.
DIN 3059 / DIN EN 12385-4-2003
Warrington type ropes should be applied in hostile environment conditions and when used outdoors and exposed to intensive alternative bending. High structural strength of these ropes (wires of different diameters in the outer layer of a strand) provides their effective use in strenuous conditions.
6х19(1+6+6/6) (W)
Fibre (FC) or metal core (MC) ropes can be manufactured
DIN 3060 / DIN EN 12385-4-2003
Standard type ropes are applied in strenuous operation conditions, where alternating bendings and pulsating loads are insignificant or miss.
6х19 (1+6+12) (M)
Fibre (FC) or metal core (MC) ropes can be manufactured
DIN 3062 / DIN EN 12385-4-2003
Applied as ropes for lift equipment and power-hoisting equipment.
Seal type ropes demonstrate stable operability in high abrasive wear conditions due to the increased diameter of wires in the upper layer. Increased blocks and drums diameter is required for their normal running.
8х19 (1+9+9) (S)
Fibre (FC) ropes can be manufactured
It is possible to produce ropes for lift equipment from wires of two marking groups: outer wires of marking group 1370 N/mm2, inner wires of strand – 1770 N/mm2
DIN 3063 / DIN EN 12385-4-2003
Applied as ropes for lift equipment and power-hoisting equipment.
Warrington type ropes should be applied in hostile environment conditions and when used outdoors and exposed to intensive alternative bending. High structural strength of these ropes (wires of different diameters in the outer layer of a strand) provides their effective use in strenuous conditions.
8х19 (1+6+6/6) (W)
Fibre (FC) ropes can be manufactured
DIN 3064 / DIN EN 12385-4-2003
Warrington-Seal type ropes are characterized by comparatively big number of wires in strands and consequently high flexibility. Wires of bigger diameter in the outer layer of the rope provide its successful application under conditions of abrasive damage and corrosive environment.
6х36 (1+7+7/7+14) (WS)
Fibre (FC) or metal core (MC) ropes can be manufactured
DIN 3066 / DIN EN 12385-4-2003
Standard type ropes are applied in strenuous operation conditions, where alternating bendings and pulsating loads are insignificant or miss.
6х37 (1+6+12+18) (M)
Fibre (FC) or metal core (MC) ropes can be manufactured
DIN 3069 / DIN EN 12385-4-2003
Due to the increased number of strands (as compared to the 6 strand ropes) these ropes are more flexible, and at the same time, demonstrate high tensile strength and reduced friction between the outer wires of strands and the surface of block grooves. Opposite lay direction of external and internal strand layers prevents the rope from rotating around its axis.
These advantages extend the operational life of the rope and significantly reduce operating costs.
DIN 3071 / DIN EN 12385-4-2003
Due to the increased number of strands (as compared to the 6 strand ropes) these ropes are more flexible, and at the same time, demonstrate high tensile strength and reduced friction between the outer wires of strands and the surface of block grooves. Opposite lay direction of external and internal strand layers prevents the rope from rotating around its axis.
These advantages extend the operational life of the rope and significantly reduce operating costs.
DIN EN 12385-4-2003
Due to the increased number of strands (as compared to the 6 strand ropes) these ropes are more flexible, and at the same time, demonstrate high tensile strength and reduced friction between the outer wires of strands and the surface of block grooves.
These advantages extend the operational life of the rope and significantly reduce operating costs.
8х26(1+5+5/5+10) (WS)
Fibre (FC) or metal core (MC) ropes can be manufactured
TRANSPORT Valimar Ltd. has its own autopark with cars, vans, and trucks.